NEXELTRON 16 Port Gigabit PoE Switch + 2 SFP
16Gb PoE + 2Gb Uplink + 2 SFP — a Made-in-India PoE switch for CCTV and IP networks, with PoE Watchdog auto-reboot, heavy-duty power supply and 250 m long-range Extend.
Specifications
| Model / SKU | NX-SW-009 |
|---|---|
| Configuration | 16Gb PoE + 2Gb Uplink + 2 SFP |
| PoE ports | 16 × 1000 Mbps (Gigabit) |
| Uplink ports | 2 × Gigabit uplink |
| SFP (fibre) slot | 2 × SFP |
| Total PoE power | 300 W (auto power allocation) |
| Cameras supported | Up to 16 IP cameras (one per PoE port) |
| PoE Watchdog | Yes — auto power-cycles a hung camera's port |
| Long-range Extend | Yes — up to 250 m in Extend mode |
| Surge protection | 2KV spike protection |
| Warranty | 1-year certified warranty, next-day replacement on local stock |
| Origin | Made in India |
| MRP | ₹12,999 (incl. GST) |
Who is it for?
Best for factories, hotels, hospitals and large buildings with 9–16 cameras — Gigabit ports also suit Wi-Fi access points and 4K / high-bitrate cameras. The SFP slot lets you connect a fibre link to a far building or the main server room.
16 PoE ports means up to 16 IP cameras, one per port. The 300 W total PoE budget gives about 18.8 W per port when every port is busy — most 2MP–5MP IP cameras typically draw 4–8 W, so a full set of standard cameras runs comfortably. PTZ or heater cameras draw more; check the camera's spec sheet.
Why NEXELTRON
- PoE Watchdog auto-reboot — a hung camera restarts on its own, saving site visits.
- Heavy-duty power supply — the power supply is the most common PoE failure point, so ours is over-specified.
- 250 m Extend mode — reach cameras a standard 100 m switch cannot.
- 2KV surge protection — built for Indian power conditions and lightning-prone areas.
- Local stock & next-day replacement — no long import waits on warranty.
Frequently asked questions
How many cameras can the NEXELTRON 16 Port Gigabit PoE Switch + 2 SFP run?
16 PoE ports means up to 16 IP cameras, one per port. The 300 W total PoE budget gives about 18.8 W per port when every port is busy — most 2MP–5MP IP cameras typically draw 4–8 W, so a full set of standard cameras runs comfortably. PTZ or heater cameras draw more; check the camera's spec sheet.
What is the price of the NEXELTRON 16 port PoE switch?
The 16Gb PoE + 2Gb Uplink + 2 SFP model (NX-SW-009) has an MRP of ₹12,999 including GST. Dealers get separate dealer pricing — apply on the website or call 1800 180 4044.
What is PoE Watchdog auto-reboot?
If a connected camera hangs and stops responding, the switch detects it and power-cycles only that port, so the camera restarts by itself — no technician visit needed.
Can I run a camera more than 100 metres away?
Yes. Normal Ethernet is limited to about 100 m. Turn on Extend mode and the switch can reach a camera up to 250 m away (at reduced speed, which is fine for CCTV).
Do I need Gigabit ports for CCTV?
Not for normal 2MP–5MP cameras, but Gigabit (1000 Mbps) ports give plenty of headroom for 4K cameras, high bitrates and Wi-Fi access points.
Where do you deliver and what warranty do I get?
We supply across India from Pantnagar, Uttarakhand. Every switch carries a 1-year certified warranty with next-day replacement from local stock. Call 1800 180 4044 or WhatsApp +91 79005-88588.
Other PoE switches
8 Port Fast Ethernet PoE Switch
8 Port Gigabit PoE Switch
8 Port Gigabit PoE Switch + 1 SFP
