Home › PoE Switches › 4 Port Gigabit PoE Switch with AI Mode
PoE Switch · NX-SW-002

NEXELTRON 4 Port Gigabit PoE Switch with AI Mode

4Gb PoE + 2Gb Uplink + AI — a Made-in-India PoE switch for CCTV and IP networks, with PoE Watchdog auto-reboot, heavy-duty power supply and 250 m long-range Extend.

4 PoE portsGigabit65W budgetAI mode1-Year Warranty
₹2,999
MRP, inclusive of GST · Dealer pricing on request
NEXELTRON 4 Port Gigabit PoE Switch with AI Mode NX-SW-002

Specifications

Model / SKUNX-SW-002
Configuration4Gb PoE + 2Gb Uplink + AI
PoE ports4 × 1000 Mbps (Gigabit)
Uplink ports2 × Gigabit uplink
SFP (fibre) slotNo
Total PoE power65 W (auto power allocation)
Cameras supportedUp to 4 IP cameras (one per PoE port)
PoE WatchdogYes — auto power-cycles a hung camera's port
Long-range ExtendYes — up to 250 m in Extend mode
Surge protection2KV spike protection
AI modeYes
Warranty1-year certified warranty, next-day replacement on local stock
OriginMade in India
MRP₹2,999 (incl. GST)

Who is it for?

Best for homes, small shops, clinics and offices with up to 4 cameras — Gigabit ports also suit Wi-Fi access points and 4K / high-bitrate cameras.

4 PoE ports means up to 4 IP cameras, one per port. The 65 W total PoE budget gives about 16.2 W per port when every port is busy — most 2MP–5MP IP cameras typically draw 4–8 W, so a full set of standard cameras runs comfortably. PTZ or heater cameras draw more; check the camera's spec sheet.

Why NEXELTRON

  • PoE Watchdog auto-reboot — a hung camera restarts on its own, saving site visits.
  • Heavy-duty power supply — the power supply is the most common PoE failure point, so ours is over-specified.
  • 250 m Extend mode — reach cameras a standard 100 m switch cannot.
  • 2KV surge protection — built for Indian power conditions and lightning-prone areas.
  • Local stock & next-day replacement — no long import waits on warranty.

Frequently asked questions

How many cameras can the NEXELTRON 4 Port Gigabit PoE Switch with AI Mode run?

4 PoE ports means up to 4 IP cameras, one per port. The 65 W total PoE budget gives about 16.2 W per port when every port is busy — most 2MP–5MP IP cameras typically draw 4–8 W, so a full set of standard cameras runs comfortably. PTZ or heater cameras draw more; check the camera's spec sheet.

What is the price of the NEXELTRON 4 port PoE switch?

The 4Gb PoE + 2Gb Uplink + AI model (NX-SW-002) has an MRP of ₹2,999 including GST. Dealers get separate dealer pricing — apply on the website or call 1800 180 4044.

What is PoE Watchdog auto-reboot?

If a connected camera hangs and stops responding, the switch detects it and power-cycles only that port, so the camera restarts by itself — no technician visit needed.

Can I run a camera more than 100 metres away?

Yes. Normal Ethernet is limited to about 100 m. Turn on Extend mode and the switch can reach a camera up to 250 m away (at reduced speed, which is fine for CCTV).

Do I need Gigabit ports for CCTV?

Not for normal 2MP–5MP cameras, but Gigabit (1000 Mbps) ports give plenty of headroom for 4K cameras, high bitrates and Wi-Fi access points.

Where do you deliver and what warranty do I get?

We supply across India from Pantnagar, Uttarakhand. Every switch carries a 1-year certified warranty with next-day replacement from local stock. Call 1800 180 4044 or WhatsApp +91 79005-88588.

Other PoE switches

See all PoE switches & compare → · CCTV camera racks →